Green custom pcb board pcb manufacturing

1. Material selection in green custom pcb board manufacturing

There are many types of materials in electronic products, such as conductive materials, semiconductor materials, and insulating materials. The green nature of the material has a very important impact on that of the product, and we should be especially pay attention when selecting:

1) Use non-toxic, non-polluting, non-corrosive materials as much as possible.

2) Preferred recyclable materials and standardized materials.

3) Use as few material types as possible for the same product unit.

4) In order to facilitate recycling, the material should be marked with its model, type, grade and so on.

2. Component selection in green custom pcb board manufacturing

There are also many types of components in electronic products. Starting from the green design concept, you should pay attention to the selection:

1) The types and specification of components should be as small as possible.

2) Try to use low-power devices (especially integrated circuits).

3) Devices such as integrated circuits should be able to be connected to the circuit through an integrated circuit socket.

4) The selected components should be clearly marked and standard components should be used as much as possible.

5) AC-powered electronic products generally contain a power transformer. For the intended power-frequency radiation, a power transformer with a shielded casing should be preferred.

6) DC-powered custom pcb board electronic products generally use batteries as the power source. When using, try to use high-energy batteries made of non-toxic materials. If the battery is toxic, it is necessary to mark the toxic materials for post treatment