Pcb manufacturer SMT workshop temperature and humidity requirements

For pcb manufacturer, SMT processing is to attach an electronic capacitor or resistor to a machine and which become stronger and less likely to fall to the ground during welding.The capacitive resistor that passes high-tech SMT processing is much faster than manual SMT, and not easy to make mistake.

SMT, short for Surface Mounted Technology, is a popular processing Technology in the electronics industry among PCB manufacturers in China.Even though SMT processing is a high-tech product, PCB manufacturers have high requirements on SMT processing workshop. Let's have a look.

SMT manufacturers have certain requirements on environment, humidity and temperature. In order to ensure the quality of electronic components and complete the processing quantity in advance, there are the following requirements on working environment:

First of all, the temperature is required. The best temperature in the factory is 23±3℃ all year round, which cannot exceed the limit temperature:15 ~ 35℃

Followed is humidity requirements, SMT processing workshop humidity has a great influence in the quality of products, environmental humidity is bigger, the electronic components are easier to be affected by damp which affect conductivity, welding is not smooth, when humidity is low, the air in the workshop would be easy to dry, it’s easily to generate static electricity, therefore, before entering SMT processing workshops, processing personnel shall wear antistatic clothing.Under normal circumstances, the workshop is required to maintain a constant humidity of about 45% ~ 70% RH

The SMT workshop of PCB manufacturing should be cleaned without any smell or dust. No corrosive materials are needed. They will seriously affect the reliability of capacitor resistance, increase the fault maintenance rate of SMT processing equipment, and reduce the production schedule.The best cleanliness of the workshop should be about 100,000 (bgj73-84).

Finally, the stability of the power supply is required. In order to avoid equipment failure during processing and affect the quality and progress of processing, a voltage stabilizer should be added to the power supply to ensure the stability of the power supply.