Printed circuit board manufacture environment

Electrostatic hazard

1. Adsorb dust and reduce the insulation resistance of components, causing short circuit of electronic products.

2. Electrostatic discharge (ESD) damage, breakdown of the chip, causing damage to electronic components can not work.

3. The electromagnetic field was generated huge amplitude by electrostatic discharge(up to several hundred volts/meter), and the electromagnetic field with extremely wide spectrum (from tens of megahertz to several gigahertz) causes electronic products to be damaged by electromagnetic interference.

4. The anti-static technology of the processing plant not up to standard will not lead to explosion or high necrosis rate

Serious - explosion or all bad

Hidden danger - damage after a period of time or a year later

Mild - reduced life

How does FASTPCBA control the electrostatic hazard? (100% anti-static)

1. 5000 square meters of dust-free production workshop, the ground floor of the first layer of copper, conductive layer, copper strip cylinder into the ground 2.5 meters, to maintain static electricity can be released to the earth, in line with the certification standards of the anti-static workshop.

2.Electrostatic control detector

Static detection and prevention process: release - test whether it’s completed - if it exceeds the standard, it is not accessible.

3. Staff, wearing static clothes, static shoes, wearing electrostatic caps, wearing static gloves, electrostatic ring

FASTPCBA product quality assurance 100% no static production, the real security assured.