Since PCBA carries more electronic components, it has extremely high requirements for ESD static electricity and anti-collision. Therefore, the safe packaging of PCBA boards is particularly important. Many factories use the simplest bubble bag to package products, but this is only suitable for short-distance transportation, which is often the delivery method. For long-distance transportation, international express delivery, etc., the industry's more peer-to-peer packaging method at this time is electrostatic bag + PE pearl cotton + carton for packaging. This has the advantage of effectively avoiding static electricity damage and buffering impact during transportation.

After the PCBA processing is completed, we need to transport the PCB board to the customer in various ways. During the transportation and packaging process, we need to pay attention to the following requirements.

1. Packaging materials

PCB boards are relatively fragile and easily damaged products, so they must be carefully packaged in bubble bags, pearl cotton, electrostatic bags, and vacuum bags before transportation.

2. Anti-static packaging

Static electricity will penetrate the chips in the PCB board. Because static electricity is invisible, intangible, and easy to generate, it is necessary to use anti-static packaging during the packaging and transportation.

3. Moisture-proof packaging

Before packaging, clean and dry the surface of the PCB board, and spray the three-proof paint.

4. Anti-vibration packaging

Put the packaged PCB board in an anti-static packaging box. When it is placed vertically, it should not be stacked up to more than two layers, and a spacer should be placed in the middle to keep it stable and prevent shaking.