Search - components-FASTPCBA Is Professional 20 Years PCB Manufacturing and PCB Assembly

[Company News]Comparison of SMT and traditional through-hole technology2021/03/15/ 16:26: Surface mount technology (SMT) is used almost exclusively by PCB components, and for good reasons. SMT is a fast, fully automated process that can improve the accuracy of component placement, reduce manual labor, provide consistent quality and reduce costs.; Read（0） Label：

[Company News]What are PCB conformal coatings and uses?2021/03/04/ 17:51: It is important to note that battery packs in certain applications may be exposed to corrosive elements such as acidic substances, salt, and sometimes conductive substances and liquids. Over time, this exposure will slowly corrode PCBA, components and solder joints. This type of corrosion can lead to premature failures, short circuits and dangerous situations that can lead to fires or even explosions.; Read（0） Label：

[Company News]Through hole assembly2021/01/28/ 13:52: Through hole assembly refers to the process of soldering through-hole components to the bare board by wave soldering or manual soldering, and the component leads are drilled through the PCB board.; Read（0） Label：

[Posts]SMT mounting method for double-sided circuit boards2021/01/19/ 11:55: As circuit boards become more integrated, double-sided mounting circuit boards will be widely used in the future. Terminal products are getting smaller, smarter, and more integrated. Components with various functions are stacked on a PCB circuit board, so it is necessary to use both sides A and B of the circuit board.; Read（0） Label：

[Posts]PCBA process: prevent failures caused by reflow soldering2021/01/04/ 17:19: Reflow soldering is a surface mount technology (SMT) process that is used to connect components to the top layer of the PCB. For double panels, the bottom layer is the same. The process involves running the circuit board through an oven and going through a four-stage profile: preheating, soaking, reflow, and cooling.; Read（0） Label：

[Company News]DIP assembly and process flow2020/12/30/ 10:42: The dual in-line package is also called DIP assembly, or DIP for short. It is an integrated circuit assembly method. The shape of the integrated circuit is rectangular, and there are two parallel rows of metal pins on both sides, called pin headers. DIP assembled components can be soldered in the through holes plated on the printed circuit board or inserted into the DIP socket.; Read（0） Label：

[Posts]What is DIP assembly? What are the characteristics of DIP?2020/12/22/ 16:51: DIP is one of the basic components of electronic components. It is called dual in-line assembly technology. It refers to the integrated circuit chip assembled in the dual in-line form, which is also used in most small and medium-sized integrated circuits. The number of pins generally does not exceed 100.; Read（0） Label：

[Posts]What is the difference between SMT and THT?2020/11/21/ 14:50: From the perspective of assembly process technology, the fundamental difference between SMT and THT is "sticking" and "plugging." The difference between the two is also reflected in the substrate, components, component shape, solder joint shape and assembly process methods.; Read（0） Label：

[Posts]What is the difference between SMD and SMT?2020/11/17/ 16:20: Surface Mount Technology (SMT) is essentially a method of placing components on a circuit board. Modern SMT assembly technology is smaller, more efficient and faster to operate. Surface Mount Device (SMD) is the actual component mounted on the circuit board according to the specific component.; Read（0） Label：

[Company News]The development status and trend analysis of the global PCB industry in 20202020/10/12/ 16:35: As a bridge that carries electronic components and connects circuits, PCBs are widely used in communication electronics, consumer electronics, computers, automotive electronics, industrial control, medical equipment, national defense, and aerospace. It is an indispensable electronics in modern electronic information products. Components.; Read（0） Label：

[Company News]What is the process of PCBA repair and what are the steps?2020/09/30/ 09:58: PCBA processing is to place and solder these integrated circuits and electronic components on a printed circuit board through the PCBA production line to become the main board of the computer, color TV, and communication equipment.; Read（0） Label：

[Posts]Reliability of multilayer circuit boards2020/09/07/ 16:28: Due to the use of new production materials, the volume of the multilayer circuit board is small and the weight is relatively light. Most importantly, the connection lines of the internal components are also greatly reduced.; Read（0） Label：

[Company News]Three aspects of PCB circuit board connection2020/09/04/ 16:47: PCB circuit boards are the basic components of electronic products, and any electronic product needs a circuit board to be made. PCB circuit boards must be connected to other devices in electronic products. This is the interconnection of PCBs. In general, there are three aspects of PCB connection: chip to PCB, PCB internal, PCB and external components.; Read（0） Label：

[Company News]Components heat resistance and moisture sensitive problems during lead-free soldering2020/01/04/ 09:45: First, components heat resistance Ceramic resistors and special capacitors are very sensitive to the slope of the temperature curve (rate of temperature change), because the coefficient of thermal expansion (CTE) of the ceramic body and the PCB is quite different (3 ~ 5x10 ℃ for inner porcelain, and about 17x10 ℃ for PCB) , When the solder joint is cooled, it is easy to cause component body and solder joint crack. Component cracking is directly proportional to the difference in CTE, temperature, and component size.; Read（0） Label：components| pcb board| pcb manufacturing| pcb assembly| pcb factory| pcb assembly| prototype pcb

[Company News]Relationship between PCB assembly and high density PCB2020/01/02/ 15:10: After the basic functions of electronic devices have been determined at the beginning of the design, the designer hands over the non-standard components to the fabs for fabrication, and the other standard components to the market. Once thes...; Read（0） Label：

[Company News]PCB Manufacturing Introduction2019/12/23/ 11:47: Many people have heard of the acronym "PCB" in English. But what does it mean? In fact, it is very simple. It is a printed circuit board (PCB), which is a provider of electrical connections for electronic pcb manufacturing components; Read（0） Label：pcb manufacturing| pcb manufacturing china| pcb manfuacturing factory| pcb factory| pcb assembly

[Company News]How to choose lead-free PCB material and pad coating2019/12/19/ 10:44: The choice of lead-free PCB manufacturing materials must consider the compatibility between high temperature and PCB materials.High temperatures will cause thermal deformation of the PCB and damage the components in severe cases: high temperatures will also cause the polymer to age and deteriorate, making the PCB mechanical strength and electrical performance is degraded.; Read（0） Label：pcb manufacturing| pcb manufacture| pcb prototype| pcb assemble| make circuit board

[Company News]SMT process requirements for PCB2019/12/17/ 11:57: In the actual production of SMT, some customers' PCBs are designed with many devices close to the board edge, and our equipment clamping edge is made of steel, and its width is 5mm. It will cause the device to damage the board edge devices, so it is not recommended that customers have devices on the board edges. If there are devices, add process edges to protect the product.; Read（0） Label：smt process| pcb manufacturing| pcb assembly| pcb prototype| pcb factory| pcb manufacturer|PCB Assembly|SMT Assembly|PCB Fabricating|Components

[Company News]Through Hole Reflow Process (PIHR) introduction2019/12/10/ 14:19: Through-hole component reflow soldering process (Pin-In-Hole Reflow, PIHR) is to insert pins into the insertion hole filled with solder paste and use the reflow soldering process method to achieve through-hole components and surfaces mount components (SMC / SMD) are reflowed at the same time. Compared with traditional crafts, it has great advantages in economy and advancedness.; Read（0） Label：pcb manufacturing| pcb manufacture| pcb prototype| pcb assemble| make circuit board

[Company News]How to choose electronic components2019/12/09/ 15:01: The selection of components should be based on the circuit requirements of the specific product, as well as the size of the PCB, the density and type of the assembly, the grade of the product and the cost of the input.; Read（0） Label：electronic components| pcb manufacturing| pcb assembly| pcb production| pcb fabrication

Search Products

Search News

Relevant Search

Spotlight

Service

About us

FASTPCBA Co.,Ltd