Home
FASTPCBA
PCB Board
PCB Assembly
News
QuoteSearch Products
Search News
- [Company News]Online pcb manufacturing component defect cause and solution2019/10/18/ 19:57
- FASTPCBA leading online pcb manufacturing over 15 years, our partners among medical, automotive, military, aviation, industry control etc industry. With IATF 16949, ISO9001 and ISO 13485 certificates.
- Read（0）
- [Company News]How does pcb board manufacturer protect against static electricity?2019/10/18/ 16:40
- PCB board manufacturer regularly check tools with anti-static requirements to keep them in a qualified state; test environmental parameters such as humidity, temperature, concentration, static point position, etc.; test the electrostatic sensitivity of the product and establish a quality analysis and feedback system.
- Read（0）
- [Company News]Factors affecting pcb manufacturing wave soldering quality2019/10/18/ 00:38
- There are many factors affecting the quality of pcb manufacturing wave soldering, mainly are production materials, production equipment and production processes.
- Read（0）
- [Company News]Online PCB Manufacturing poor tin defects analysis and solutions2019/10/17/ 18:15
- Online PCB Manufacturing poor tin defects analysis and solutions
- Read（0）
- [Company News]Pcb production X-ray inspection process2019/10/16/ 00:01
- Pcb production X-ray inspection process 1. Preparation A. Check the machine and confirm that the front and rear doors are completely closed. B.Be careful not to put your hand on the door shaft to prevent crushingduringopening and closing t...
- Read（0）
- [Company News]Pcba manufacturing pcb maker rework process basic requirements2019/10/15/ 21:10
- Basic requirements for tool using by pcb maker during repair can be concluded at 10 point, more information you can pay attention to our news status, written by pcba23@pcb-smt.net
- Read（0）
- [Company News]Pcb manufacturing companies electric iron operation sequence2019/10/15/ 18:38
- Pcb manufacturing companies electric iron operation sequence (1) Turn on the power switch. (2) Adjust the temperature control iron knob to the desired temperature. (3) When the heating indicator light starts to flash, the operator of pc...
- Read（0）
- [Company News]PCB company's AOI problems and future development trends Although AOI has higher efficiency than manual visual inspection, after all, the results are2019/10/15/ 16:30
- PCBcompany's AOI problems and future development trends Although AOI has higher efficiency than manual visual inspection, after all, the results are obtained through the collection and analysis of the graph, and the related software techno...
- Read（0）
- [Company News]How to set smt soldering circuit board welding temperature profile?2019/10/14/ 20:56
- For smt soldering circuit board lead or lead-free process, why should there be a 11 ° C-12 ° C overheating? There are two reasons, one is to ensure that the BGA package completes the second collapse......
- Read（0）
- [Company News]Pcb testing circuit board factory AOI working principle2019/10/14/ 15:05
- For Pcb testing circuit board factory, the basic principle of AOI detection is to compare, analyze and judge the reflected amount of the light source with the programmed standard by illuminating the measured object with artificial light source, LED light, optical lens and CCD.
- Read（0）
- [Company News]PCB assembly pcb manufacturers commonly used test methods2019/09/24/ 11:07
- PCB assembly pcb manufacturers commonly used test methods The PCBA test methods commonly used by PCB manufacturers are mainly as follows: 1, Manual testing Manual testing relies directly on visual testing, and pcb manufacturers use vis...
- Read（0）
- [Company News]Pcb assembly PCB component adjustment method2019/09/23/ 09:25
- First of all, the mechanical adjustment of PCB assembly PCB components, nozzle rotation adjustment direction, this method can achieve limited accuracy, it’s not suitable for future models.
- Read（0）
- [Company News]PCB smt's overall requirements for printed circuit boards2019/09/16/ 10:47
- Surface Mount Printed Circuit Board (SMB) is very different from traditional printed circuit boards. The PCB SMT reflow process requires SMB to pass through a 230 ° C (lead-free up to 260 ° C) high temperature furnace. Therefore, the requirements of the PCB SMT substrate material are much higher than those of the conventional printed circuit board, and the requirements are mainly high temperature resistance and flatness. In addition, because SMB has the characteristics of high density and small aperture, the processing difficulty is much larger than that of traditional printed circuit boards.
- Read（0）
- [Company News]PCB prototype Circuit Boards Poor Plating Causes Analysis2019/09/11/ 10:12
- Due to the adsorption of hydrogen on the surface of the plated part and not released that form pinhole on pcb prototype pcb. The plating solution cannot be lubricated on the surface of the plating devices, so that the plating layer cannot be electrolyzed. As the thickness of the coating around the hydrogen evolution point increases, the hydrogen evolution point forms a pinhole. It features as a shiny round hole and sometimes with an upward small tail. When the wetting agent is absent in the plating solution and the current density is high, pinholes are easily formed on pcb prototype circuit board.
- Read（0）
- [Company News]PCB assembly circuit board corrosion solution2019/09/09/ 14:28
- Pcb assembly boards are very common at present, and almost all electronic products need to use PCB boards!
- Read（0）
- [Company News]SMT pcb circuit board applying three anti-paint effect and precautions2019/09/06/ 10:32
- Three anti-paint is a specially formulated coating used to protect smt pcb circuit boards and their associated equipment from the environment erosion. The three anti-paint has good resistance to high and low temperature; it forms a transparent protective film after curing, and has superior properties of insulation, anti-moisture, anti-leakage, anti-shock, anti-dust, anti-corrosion, anti-aging and corona resistance.
- Read（0）
- [Company News]PCB smt layout tips and considerations2019/09/04/ 14:17
- For hardware electronics designers, the PCB smt design is becoming more and more complex. Advanced package devices with increasingly dense pins are used, and the network density per unit area continues to increase, bring more pressure on the layout. At the same time, more engineers cannot meet the 100% coverage rate of the autorouter, and hope to be able to conduct electrical rules to constrain the wiring to meet the signal integrity requirements.
- Read（0）
- [Company News]PCB smt inspection nine basic common senses2019/09/03/ 13:42
- It’s the time to pay attention to the details for PCB smt board inspection , in order to ensure the better products quality , we should pay attention to the following nine common sense during testing the PCB smt board.
- Read（0）
- [Company News]During pcb manufacturing, PCB board debugging method2019/09/02/ 11:41
- For the new PCB board that we just got back during pcb manufacturing, we must first observe whether there are any problems on the board, such as whether there are obvious cracks, short circuit or open circuit. If necessary, check if the resistance between the power supply and the ground is large enough.
- Read（0）
- [Company News]What is PCB circuit boards’ corrosion process?2019/08/29/ 18:09
- PCB circuit boards are widely used in electronics, computers, electrical appliances, mechanical equipment, etc. It is the support of components, mainly used to connect components to provide electrical, the most common and widely used 4 and 6 layer boards according to the industry application, different levels of PCB layers can be selected.
- Read（0）
Relevant Search
Spotlight
What is difference between PCB and PCBA?
- we know that PCBA gene...
- 1What is circuit board design for manufacturability?
- 253rd Earth Day on April 22, 2022
- 3What are the classifications of dry film photoresists in pcba circuit boards?
- 4What is Halogen Free PCB Board?
- 5How to solve the problem of chip components standing up during SMT assembly?
- 6What are the standards for SMT and DIP assembly of components?
- 7Advantages and disadvantages of PCB flying probe testing
- 82022 Tomb Sweeping Day Holiday
- 9What is MCPCB?
- 10How to distinguish the number of pcb layers?
Building 1, Senyang Electronic Technology Park, Guangming High-tech Park, Yutang Street, Guangming District, Shenzhen City.
F:86-13418481618
pcba13@fastpcba.cn
