Home
FASTPCBA
PCB Board
PCB Assembly
News
QuoteSearch Products
Search News
- [Company News]PCB fabrication reflow process advantages2019/11/05/ 15:37
- Choosing the right pcb fabrication welding process has a large impact on the quality of the solder joints after assembly. Which process is selected is mainly based on the assembly density of PCB printed circuit boards and SMT production line equipment conditions.
- Read（0）
- [Company News]Pcb supplier reflow solder ball generation cause and solution2019/11/04/ 15:45
- In pcb supplier circuit board manufacturing, the generation of solder balls is closely linked to the soldering process of solder joints. If the gas in the solder joint does not escape in time, it may cause voiding.
- Read（0）
- [Company News]Prototype pcb manufacturing, how to control PCB and components before wave soldering?2019/11/02/ 11:30
- For printed circuit boards that have been placed for a long time, the surface is generally cleaned, which improves the solderability of prototype pcb manufacturing, reduces virtual soldering and bridging. For component leads that have a certain degree of oxidation on the surface, the surface oxide should be removed firstly.
- Read（0）
- [Company News]Online pcb manufacturing welding requirements for production process materials2019/11/01/ 16:26
- Online pcb manufacturing welding requirements for production process materials
- Read（0）
- [Company News]PCB manufacturing companies clean - free flux requirements2019/10/30/ 17:40
- In order to make the soldered PCB meet the specified quality requirements without cleaning, the selection of flux is the key. PCB manufacturing companies usually have the following requirements for the solders without cleaning
- Read（0）
- [Company News]Printed circuit board manufacturers reflow soldering poor wetting solution2019/10/28/ 10:33
- The welding quality of components' solder joints is a key factor that directly affects the quality of printed circuit components and even the whole machine
- Read（0）
- [Company News]Prototype pcb manufacturing BGA package category and process characteristics2019/10/25/ 16:06
- The BGA package is available in PBGA, TBGA, CBGA, FBGA and other categories. PBGA and CBGA will undergo "dynamic deformation" during welding due to the different layered structure of the package and the coefficient of thermal expansion (CTE) of each layer of material. That is, Deformation will occur with increasing temperature during the re-flow soldering of prototype pcb manufacturing due to warping.
- Read（0）
- [Company News]Pcb manufacturing company wave soldering joint requirements2019/10/25/ 15:54
- The requirements for soldering solder joints of pcb manufacturing companies are shown in Table 12-1 below.
- Read（0）
- [Company News]Prototype pcb manufacturing solder joint formation process and influencing factors2019/10/24/ 16:08
- The prototype pcb manufacturing electronic product is soldered by heating and flux applications to activate the flux, remove the oxide film on the surface to be soldered, liquefy the solder and complete the wetting and diffusion process to form solder joints. Specifically, the formation of solder joints involves two processes:
- Read（0）
- [Company News]Prototype pcb manufacturing complete solder joint requirements2019/10/23/ 14:36
- Prototype pcb manufacturing complete solder joint requirements are introduced in the article
- Read（0）
- [Company News]PCB manufacturing lead-free flux main problems and countermeasures2019/10/21/ 15:58
- Lead-free solder pastes and wave soldered water soluble fluxes are also required for certain pcb manufacturing products.
- Read（0）
- [Company News]How does pcb board manufacturer protect against static electricity?2019/10/18/ 16:40
- PCB board manufacturer regularly check tools with anti-static requirements to keep them in a qualified state; test environmental parameters such as humidity, temperature, concentration, static point position, etc.; test the electrostatic sensitivity of the product and establish a quality analysis and feedback system.
- Read（0）
- [Company News]Prototype pcb manufacturing defect analysis and solutions2019/10/17/ 21:29
- Prototype pcb manufacturing defect analysis and solutions 1. PCB deformation is greatly, bending Causes analysis of defects A. High preheating temperature B. Long time pass tin C. The temperature of the tin pot is high D. The cooling rate ...
- Read（0）
- [Company News]Prototype pcb failure cause analysis (2)2019/09/22/ 00:01
- As the hub of various components and circuit signal transmission, prototype PCB has become the most important and key part of electronic information products.Which quality and reliability determine the quality and reliability of the whole equipment.
- Read（0）
- [Company News]Pcb manufacturer how to control lead-free wave soldering process2019/09/12/ 10:46
- The pcb manufacturer quality control method of wave soldering is basically the same as reflow soldering in principle, because their soldering mechanism and RC28F128K3C solder joint quality requirements are the same.
- Read（0）
- [Company News]PCB assembly circuit board corrosion solution2019/09/09/ 14:28
- Pcb assembly boards are very common at present, and almost all electronic products need to use PCB boards!
- Read（0）
- [Company News]PCB smt layout tips and considerations2019/09/04/ 14:17
- For hardware electronics designers, the PCB smt design is becoming more and more complex. Advanced package devices with increasingly dense pins are used, and the network density per unit area continues to increase, bring more pressure on the layout. At the same time, more engineers cannot meet the 100% coverage rate of the autorouter, and hope to be able to conduct electrical rules to constrain the wiring to meet the signal integrity requirements.
- Read（0）
- [Company News]During pcb manufacturing, PCB board debugging method2019/09/02/ 11:41
- For the new PCB board that we just got back during pcb manufacturing, we must first observe whether there are any problems on the board, such as whether there are obvious cracks, short circuit or open circuit. If necessary, check if the resistance between the power supply and the ground is large enough.
- Read（0）
- [Company News]PCB Plate2019/08/13/ 17:14
- PCB Plate introduction:PCB Plate, also known as printed circuit board, is a supplier of electrical connections for electronic components. Depending on the number of boards, PCB boards can be divided into single board, double board, four lay...
- Read（0）
- [Company News]How to effectively control the prototype PCB assembly SMT quality?2019/07/29/ 11:03
- The SMT process of prototype PCB assembly mainly includes solder paste printing, mounting, reflow soldering and AOI inspection. The process is more complicated, and the irregular operation of any one link will seriously affect the quality of prototype pcb assembly SMT effect. Among them, the quality of prototype pcb assembly can be controlled in four key steps: steel stencil production, solder paste control, furnace temperature curve setting and AOI detection, which effectively improves the quality of welding.
- Read（0）
Relevant Search
Spotlight
What is difference between PCB and PCBA?
- we know that PCBA gene...
- 1What is circuit board design for manufacturability?
- 253rd Earth Day on April 22, 2022
- 3What are the classifications of dry film photoresists in pcba circuit boards?
- 4What is Halogen Free PCB Board?
- 5How to solve the problem of chip components standing up during SMT assembly?
- 6What are the standards for SMT and DIP assembly of components?
- 7Advantages and disadvantages of PCB flying probe testing
- 82022 Tomb Sweeping Day Holiday
- 9What is MCPCB?
- 10How to distinguish the number of pcb layers?
Building 1, Senyang Electronic Technology Park, Guangming High-tech Park, Yutang Street, Guangming District, Shenzhen City.
F:86-13418481618
pcba13@fastpcba.cn
